Mi Laser Projector 150 De Xiaomi

Xiaomi 4K Light amplification by stimulated emission of radiation Projector 150

User Notice

Cheers for choosing the Mi 4K Light amplification by stimulated emission of radiation Projector 150″.
Read this manual carefully earlier use, and retain it for future reference.
Illustrations of product, accessories, and user interface in the user manual are for reference purposes just. Actual production and functions may vary due to product enhancements.
Legal Notice

All products begetting this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/European union) which should not be mixed with unsorted household waste. Instead, you should protect human wellness and the environment by handing over your waste equipment to a designated drove bespeak for the recycling of waste electric and electronic equipment, appointed past the regime or local government. Correct disposal and recycling volition help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information most the location as well as terms and conditions of such collection points.
Hereby, Fengmi (Beĳing) Technology Co., Ltd declares that the radio equipment type Mi 4K Light amplification by stimulated emission of radiation Projector 150″ is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following net accost: http://www.mi.com/global/service/support/declaration.html

This device is restricted to indoor utilize when operating in the 5150 to 5350 MHz frequency range.
Operating Frequency: 2.4 GHz–2.4835 GHz (for Bluetooth)
Maximum RF Ability Output: 20 mW (for Bluetooth)
Operating Frequency: ii.4 GHz–2.4835 GHz (for Wi-Fi 2.4 GHz)
Maximum RF Ability Output: 100 mW (for Wi-Fi two.4 GHz)
Operating Frequency: v.15 GHz–5.35 GHz and v.47 GHz–five.725 GHz (for Wi-Fi v GHz)
Maximum RF Power Output: 200 mW (for Wi-Fi v GHz)
Note: Under normal use of condition, this equipment should be kept a separation distance of at least twenty cm betwixt the antenna and the torso of the user.

Laser Safety Information

The product complies with IEC 60825-i:2014 Form i and RG2 IEC 62471-5:2015. As with any bright light source, exercise non stare into the beam, RG2 IEC 62471-5:2015

Safe Instructions
Before using the product, please carefully read the following condom instructions.

Using an incorrect ability cord may result in decreased product performance and fifty-fifty electric shock or burn. To ensure the projector's functioning and condom, but use its original power cord or an identical replacement.
If yous use an extension string, it must not accept a electric current rating lower than the projector's original ability cord. Failure to mind this warning may result in the extension string overheating and could pose hazards such every bit electric shock and burn.
To avoid impairment caused past a power surge or lightning strike, unplug the projector from the ability outlet during thunderstorms or when it is non in use for a long time.
Do not identify any flammable objects nearly this projector then as to avoid burn.
Do not block the lens with any object when the projector is turned on. Whatever object placed close to the lens may become very hot and/or deformed, and may fifty-fifty cause a fire.
Exercise not block any of the vents of the projector, every bit this may crusade a buildup of heat inside the product and result in a fire.

Safety Precautions:

Practise not place this projector on an unstable platform, stand up or table so as to prevent it from falling and causing serious damage or personal injury.
Do not look directly into the lens when the projector is turned on to avoid eye impairment.
Exercise not attempt to disassemble this projector as it may contain dangerous high voltage components. This projector must simply be maintained and repaired past a qualified or authorized technician.
Do not place this projector in an upright position, every bit it may autumn over and crusade injury or damage.
Practice not expose this projector to rain or moisture (operating humidity is 20%–fourscore%).
Do not immerse this projector in, nor betrayal it to h2o or other liquids. Immediately unplug the projector if whatever liquid or object got into its housing, and accept it checked by a qualified technician before using information technology over again.
Do not place this projector in whatever of the following environments:

Parcel Contents

When opening the packaging, cheque the contents of the box against the listing beneath. If there is anything missing, delight contact the seller in time.

Note:

The actual contents may vary depending on the country (or region) of auction, please refer to the actual product.
Retain the original packaging for futurity storage or transportation.

Product Overview

Exterior

Connection Ports

Power Port
HDMI input port ane
HDMI input port 2
HDMI input port three Audio render channel port
Supports USB 2.0 communication protocol
Audio output port (supports subwoofers)
AV input port (3.5 mm composite AV port)
Optical digital sound point output port
Ethernet port

Power Indicator

The power indicator (a white light) to the corresponding projector's status is as follows:

Connect to the ability outlet, the projector automatically turns on.
The indicator blinks when the projector is turning on.
The indicator turns off after the projection is turned on.
The indicator blinks when the projector is turning off.

Remote Control

Projection Distance & Screen Size

Determine the distance betwixt the projector and the wall or screen according to the desired screen size.

Screen Dimensions (SD)	Projection Distance (D)	Relative Height (H)
80″	14 cm	29 cm
xc″	xix cm	32 cm
100″	24 cm	35 cm
120″	34 cm	41 cm
150″	49 cm	fifty cm

Screen Dimensions (SD):
The diagonal size of the project screen (in inches).

Project Altitude (D):
The distance between the projector and the wall or screen (in cm).

Relative Elevation (H):
The distance from the bottom of the projector to the bottom edge of the projected image (in cm).

Notation: The dimensions in the table higher up are for reference simply, they are approximate and may slightly differ from the bodily values.

Suspended Ceiling Installation

Suspended ceiling ins tallation is one of the installation methods that you lot hang the projector in an overhead location, for example, on a high ceiling, through a ceiling mount. A projector supporting suspended ceiling installation has threaded holes on the bottom, you can install the project on the mount by attaching the screws into the holes.
The installation steps are as follows:

Install the mount.
Brand sure the mount used to install the projector onto can support at least five times the weight of the projector. It requires a professional to acquit out the installation.
When installing the projector onto a ceiling mountain, make sure the screws meet the following specifications:
Screw Type: Non self-tapping spiral M4 × 10 (bore: 4 mm, length: 10 mm), 4 pcs.
Assembly Dimensions: Encounter the figure on the right.
Adjust the mount depending on your needs and firmly fix the screws to complete the installation.

Cautions:

To avoid the convective heat transfer between the air inlets and air outlets, make certain in that location are no obstructions inside fifty cm of the air inlets and oestrus dissipation vents.
Continue the bottom of the projector 10 cm away from the ceiling when suspending information technology.
Damage caused past wrong installation volition void the warranty.

Pairing the Remote

Keystone Correction
To perform keystone correction, go to Settings > Image > Keystone Correction. Utilize the Left and right remote buttons to select eight-Point Keystone Correction, Fine Tune, or Reset. Press the OK button to select a mode, so utilize the remote's directional pad to arrange the shape of the projected image.

Network & Net

Go to Settings > Network & Cyberspace. Select a wireless network to connect to, enter the password, and look for the projector to connect.

Smart Temperature Control

The projector automatically monitors the ambient temperature (operating temperature range is 0°C to xl°C), projector temperature, and color bike temperature, and the projector's fan speed is automatically adjusted based on the detected temperature values.

The projector has three brightness modes to choose from when operating at a normal temperature. To adjust the projector'south brightness level, go to Settings > Image > Brightness Manner.
If the projector gets too hot, an overheating warning will appear and the projector volition automatically switch to low brightness mode. Temperature and error warnings will be displayed automatically whenever the temperature exceeds its maximum range to inform you that the projector volition be automatically turned off.

Safety & Protection

The projector comes with an infrared sensor which is able to intelligently find and protect the human eye from damage acquired past strong light within the projected area.
The projector will reduce its brightness to the lowest possible value when the sensor is triggered and issue the following notification: "Do not look directly at the light source." Printing whatever push button on the remote to go out.

Bluetooth Speakers

The projector has four high-quality congenital-in speakers with a total output of about xxx W. The speakers can also exist used as a standalone Bluetooth stereo.

To utilise speakers as the Bluetooth stereo, printing the Abode button, then select Settings > Remotes & Accessories > Bluetooth speaker mode from the home screen. Enable the Bluetooth function on your telephone. Search and locate the projector proper name in the Bluetooth list, then pair the projector with your phone.

Notation: To connect and pair with other Bluetooth devices such as speakers and earphones, select Settings > Remotes & Accessories > Add accessory. Make certain the device is in an awaiting connexion mode with its Bluetooth function enabled.

Care & Maintenance

Heat Dissipation Maintenance

Note: Do not touch the oestrus dissipation vent or ventilation vents every bit temperatures tin can reach up t o 65°C.
Note: Practice not place any objects within fifty cm of the projector's air vents, as this will touch its estrus dissipation effect.

Cleaning & Maintenance

Only use the cleaning cloth that comes with the projector or a professional grade cleaning material to clean the projector's drinking glass.
Do non use any abrasive cleaning products, solvents, chemicals, or other rough objects and so as to avert scratches or corrosion.

Notation:

The projector is not h2o resistant. Do not allow liquids to penetrate the projector, especially areas such as the ability indicator, drinking glass embrace, air vents, connection ports, and speaker grilles.
Only utilize the cleaning cloth that comes with the projector or a professional grade cleaning cloth to make clean the projector'due south lens.

Specifications

Basic Data	Name	Mi 4K Laser Projector 150"
	Model	XMJGTYDS01FM
	Particular Dimensions	410 × 291 × 88 mm
	Internet Weight	7.0 kg
Electrical Specifications	Power Consumption	< 300 Due west (High Brightness Mode)
	Rated Input	100–120/200–240 V ~, 3/2.5 A, l/60 Hz
	Standby Ability Consumption	< 0.five W
Optical Parameters	Brandish Technology	0.47″ DMD
	Lite Source Technology	ALPD
	Standard Resolution	4K (3840 × 2160)
Projection Parameters	Throw Ratio (TR)	0.233 (*actual effect may vary)
	Screen Size	lxxx″ to 150″
	Lens Focus	Motor Focus
	Keystone Correction	8-bespeak Keystone Correction
RAM	RAM	2GB DDR3
RAM	Built-in Storage	16 GB eMMC High-speed Wink Retentivity
System Software	Operating Organisation	Android TV
	App	Pre-installed Third-political party Apps
	Brightness Manner	High Effulgence Style, View Mode
	Bluetooth	Bluetooth 4.1/BLE

Speaker Audio	Audio Effects	Dolby Audio/
Speaker Audio	Speaker	Full Range × ii/Tweeters × 2
Power Supply	Built-in Power Supply	Congenital-in Air-conditioning-DC, DC-DC
Condom & Protection	Smart Temperature Control	Automatic Brightness Adjustment/Smart Fan Speed Aligning
	Temperature Switch	Overheating Auto Turn-off
	Laser Projector Eye Protection	Man Body Detection Sensor (can be disabled)
Others	Dissonance Level	dB ( mode at an ambient temperature of 25°C)
	Remote Control	Bluetooth Remote Command
	Indicator	White light
	Storage Temperature	-xx°C to 55°C
	Operating Temperature	0°C to forty°C
	Operating Humidity	xx%–80%

Troubleshooting

Fault	Solution
No projected image	Plow o� hte projector and disconnect from the power, and then plug in the power cord and plough on the projector.
Android system crashes	Turn o� hte projector and disc onnect from the power, then plug in the power cord and turn on the projector.
Screen brandish error	Plough o� hte projector and disc onnect from the power, then plug in the power cord and turn on the projector.
Remote control is missi ng or non paired and the projector cannot be turned on remotely.	Plough o� the projector and disconnect from the power. Wait for Þve minutes, so plug in the power string and plough on the projector. A er the projector has been restarted, pair the remote control again.
If the projector overheats, it will automatically plow o�.	Please remove whatever obstacles from the air inlets and outlets so as to ensure a smoothen airßow through the projector. Follow the instructions above to restart the projector.
Other Internal Organisation Errors	Please contact a qualiÞed technician to service t he device , or render the projector to the a er-sales section.

Product Certification

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Fengmi (Beĳing) Applied science Co., Ltd. (a Mi Ecosystem visitor)
Address: 301, 3F, Building 3, No.10, Barracks S Street, Renhe Town, Shunyi Commune, Beĳing, China For further information, delight go to world wide web.mi.com